28

2024

-

06

Deli Electronics Invites You to Electronica Shanghai 2024

Author:

DDY


July 8-10, 2024, Huizhou Triad Electronics Co., Ltd. invites you to the 2024 Munich Electronics Show in Shanghai, where Triad will be in Hall E6, Booth 6729 to meet with all the guests face to face to discuss the new direction of the future development of science and technology!

Electronica China 2024 will be held on July 8-10, 2024 at the Shanghai New International Expo Center.

 

01 Triad Electronics Invites You

At this exhibition, Triad Electronics will bring innovative high-end electronic components products and make a wonderful appearance around the Internet of Things, automotive intelligence, industrial automation and other fields!

Triad team will be on site to introduce the core technology and application scenarios of the products in detail, welcome to Booth 6729 in Hall E6 to meet with us face-to-face and discuss the new direction of the future development of science and technology!

02 Registration

Scan the QR code below to complete the visitor registration and visit Electronica 2024 in Munich!

Important Note: Visitors are required to print out their e-badge and bring their ID cards to the show.

 

03 Transportation

Q: Getting there by subway

A: Take Line 7 and get off at Huamu Road Station (Exit 5), or take Line 2 and get off at Longyang Road Station (Exit 9).

Q: By Taxi

A: Drop-off point can be set at Entrance Hall 3 of Shanghai New International Expo Center.

Q: By car

A: Drive into the P1 parking lot of Shanghai New International Expo Center and pass through Entrance Hall 3 to reach the exhibition halls.

Deli Electronics

10

2024-07

Deli Electronics 2024 Munich Electronics Fair in Shanghai ended successfully!

On July 10th, the three-day Electronica 2024 Munich concluded successfully at the New International Expo Center (Shanghai). Looking back on this event, we feel that we have gained a lot from it. We would like to express our sincere thanks to all the customers and visitors, and we will continue to fulfill our trust and support in the future. We will meet again next year!

09

2024-07

Triad's booth in full swing, 2024 Electronica Shanghai Day2 newsletter

On the second day (July 9) of electronica China 2024 in Munich, Triad was there as scheduled.

08

2024-07

Deli Electronics brings you into the 2024 Munich Electronics Show Shanghai

On July 8, 2024, all eyes are on the show. Huizhou Deli Electronics Co., Ltd. debuts at Electronica 2024 in Munich.

28

2024-06

Deli Electronics Invites You to Electronica Shanghai 2024

July 8-10, 2024, Huizhou Triad Electronics Co., Ltd. invites you to the 2024 Munich Electronics Show in Shanghai, where Triad will be in Hall E6, Booth 6729 to meet with all the guests face to face to discuss the new direction of the future development of science and technology!

03

2019-04

Measurement and Diagnosis of Common Mode Inductors - An Overview of Common Mode Chokes

Filter design assumes that the two parts, common mode and differential mode, are independent of each other. However, the two components are not truly independent because the common mode choke can provide considerable differential mode inductance. This differential mode inductance can be simulated by a discrete differential mode inductor.   In order to take advantage of the differential mode inductance, common mode and differential mode should not be done at the same time but in a certain order during the design of the filter. First, the common mode noise should be measured and filtered out. By using a DifferentialModeRejectionNetwork, the differential mode component can be eliminated, thus

03

2019-04

Vehicle control electronic product software development process

The software development process for automotive vehicle control electronics is a "V" shaped development process. The "V" shaped development process is divided into five phases, i.e., functional design, prototype simulation, code generation, hardware-in-the-loop simulation-HIL, and calibration.    The main tool used in the functional design stage is MATLAB, and by using Simulink, Stateflow, and other tools provided by MATLAB, we complete the tasks of designing the control scheme, designing the functional modules, designing the control algorithms, etc., and carry out the preliminary simulation work. The main tool used in the prototype simulation stage is dSPACE. using dSPA

03

2019-04

Identification of Color Ring Resistors

Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Gold, Silver   0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 5%, 10%.   The penultimate ring indicates the number of zeros.   The last digit, the error.

03

2019-04

Semiconductor triode discrimination - simple judgment

Test transistor with a multimeter (1) will be played to the multimeter beeping file, red pen fixed a pole with a black pen to try the other two poles were a few hundred readings when the red pen is the base pole. Repeatedly try.   (2) to be tested out of the base, with a red pen connected to the base (B) multimeter has a reading of the triode for NPN (3) to be tested out of the base, with a black pen connected to the base (B) multimeter has a reading of the triode for the PNP general number of a motherboard is only a few.

©Copyright 2024 Huizhou Deli Electronics Co., Ltd. All rights reserved